OVERVIEW
The DMB‑5100E Series IP‑to‑RF Modulator stands as a newly developed, cost‑effective audio and video processing solution tailored for digital TV front‑end construction. Developed by our professional R&D team, this product integrates high‑performance signal receiving, stream processing, and digital modulation technologies to deliver stable and efficient performance at an optimized cost.
Designed to bridge IP media transmission and traditional RF distribution networks, this series accepts multimedia content transmitted over IP backbones, metropolitan area networks, and CDN platforms, then professionally converts and modulates the programs into standard digital RF signals. These modulated signals can be smoothly transmitted over coaxial cable networks as well as terrestrial and cable TV systems compliant with DVB‑T, ATSC, ISDB‑T, and DVB‑C standards.
Housed in a highly integrated, compact all‑in‑one chassis, the device supports rich and diverse input protocols to adapt to various modern streaming sources. Via its Gigabit Ethernet interface, it can receive IP transport streams in multiple mainstream formats, including RTMP, HTTP, RTSP, HLS, and SRT. A second physical network interface provides 3 independent UDP/RTP input channels and 8 MPTS UDP/RTP output channels, supporting flexible scheduling and distribution of multiple program streams.
FEATURE
The device is equipped with three Gigabit Ethernet data ports for both IP input and output.It accepts RTMP, HTTP, RTSP, HLS and SRT streams via DATA1, as well as UDP/RTP streams through DATA3.Eight MPTS outputs over UDP/RTP are available through the DATA2 interface.It can receive hundreds of IP streams, perform customized re-multiplexing, and generate up to 24 DVB-T, ATSC or ISDB-T multi-channel RF signals, allowing the distribution of hundreds of standard-definition and high-definition programs through coaxial or terrestrial networks.Flexible RF output configurations are provided, including 8, 12, 16 or 24 channels for DVB-T, ATSC, ISDB-T and DTMB, or 16/32 QAM channels for DVB-C.The front panel features L1, L2, L3, H1, H2 and H3 indicator lights for monitoring six ASI inputs.Multiplexing and modulation operations are integrated within a single unit.A web-based management interface enables convenient remote access, control and firmware upgrading.Each channel supports up to 180 PIDs with full PID remapping functionality.The unit delivers outstanding modulation performance with sharp spectral shoulders and a MER value of no less than 37 dB.It features low power consumption and high stability, with a mean time between failures of over 50,000 hours.
APPLICATION
|
Various of DTV Broadcasting Systems |
Mall Info and Corporate TV |
|
Home Entertainment |
Industrial Monitoring and HD Surveillance |
|
Campus TV and Live Sports |
Apartment, Private House |
|
Public Broadcasting |
Restaurant, Yacht, Club and Resort |
|
Hotel and Hospital TV |
Highway and Railway Mobile Device |
|
Museum, Theater and Cinema, Gymnasium |
Airport, Railway Station |
|
HDTV Distribution |
Advertisement in Square and so on |

DVB-C MODULATION
Channel:16/32*DVB-C non-adjacent frequency RF out
Frequency range:96~864MHz,1Khz one step
MER≥37 dB
Symbol rate:5~7Mbaud
Total output level adjustment -35~-5dBm by 0.1 dB step
DVB-C Standard (J83.A, J83.B, J83.C)
|
Carrier |
Annex A |
Annex B |
Annex C |
|
|
Constellation (QAM) |
16,32,64,128, 256 |
64 |
256 |
64/256 |
|
Bandwidth (Mhz) |
8 |
6 |
6 |
6 |
|
Symbol Rate ( Mbaud) |
5-7 |
5.057 |
5.361 |
4.2-5.3 |
Hot Tags: ip rf digital modulator, China ip rf digital modulator manufacturers, suppliers, factory
Specifications
FTA Tuners Input
DVB-T/T2 Tuner
Frequency range: 30MHz-1000Mhz
Bandwidth: 6Mhz, 7Mhz, 8Mhz
Level: -87 ~ -20dBm
Constellation: QPSK, 16QAM, 64QAM, 256QAM (Only DVB-T2)
FEC Demodulation: DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6
Guard Interval: DVB-T: 1/4, 1/8, 1/16, 1/32
DVB-T2: 1/4, 5/32, 1/8, 5/64, 1/16, 1/32, 1/64, 1/128
ISDB-T/Tb Tuner
Input frequency range: 30 ~ 900MHz
Bandwidth: 6MHz
Constellation: DQPSK, QPSK, 16QAM, 64QAM
Interleave: 0, 4, 8, 16
Guard Interval: 1/32, 1/16, 1/8, 1/4
Transmission mode: 2K, 4K, 8K (FFT)
FEC (Code Rate): 1/2, 2/3, 3/4, 5/6, 7/8
DVB-C Tuner
Input frequency range: 110 ~ 862MHz
DVB-C (J83.A, J83.C, NO Annex B)
Carrier: Annex A,Annex C
Constellation (QAM): 16, 32, 64, 128, 256, 64/256
Bandwidth (Mhz): 8, 6
Symbol Rate ( Mbaud): 5-7, 4.2-5.3
Tuner interface: Connecter F-female type
DVB-S/S2/S2X Tuner
Input frequency: 950-2150Mhz
Symbol rate: 1~54MSps (DVB-S QPSK)
1~60MSps (DVB-S2/S2X QPSK)
1~60MSps (DVB-S2/S2X 8PSK)
1~58MSps (DVB-S2/S2X 16APSK)
1~55MSps (DVB-S2/S2X 32APSK)
1~34MSps (DVB-S2/S2X 64APSK)
Signal strength: -65 ~ -25dBm
Half SyQuest Baseband filler (Roll off factor):
0.35 for DVB-S
0.15 to 0.35 for DVB-S2
0.05 to 0.35 for DVB-S2X
FEC demodulation: 1/2, 2/3, 3/4, 5/6, 7/8 (DVB-S QPSK)
1/4, 1/3, 2/5, 1/2, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 QPSK)
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 (DVB-S2 8PSK)
2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 16APSK)
3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 32APSK)
11/15, 7/9, 4/5, 5/6 (DVB-S2X 64APSK)
Demodulation mode: QPSK, 8PSK, 16APSK, 32APSK (Only DVB-S2)
LNB polarity selection: Vol 0, 13V, 18V Selectable
LNB band selection tone: 0/22Khz Selectable
Input Impedance: 75 Ω
FEC (Code Rate): 1/2, 2/3, 3/4, 5/6, 7/8
DiSEqC: DiSEqC 2.0 compliant
ATSC Tuner
Frequency range: 50–860 MHz
Key reference specification: ATSC A/53
Input level: -34 to +40 dBmV
Constellation: 8-VSB
Bandwidth: 6Mhz
Modulation RF Output option
Modulation (4/8*RF DVB-T/ASTC/ISDB-T or 16/32 DVB-C for option)
Connector: 1 Port, F-Type, 75Ω
Output Return Loss: 14 dB
MER ≥ 40dB
RF output level: -20 ~ 0dbm, 0.1db step
Numbers of RF Channel: 4/8
Modulation Mode: DVB-C, DVB-T, ATSC, ISDB-T, DTMB option
DVB-T Modulation
Channel: DVB-T adjacent frequencies
Modulation standard: EN300744
Frequency range: 50-960Mhz,1Khz one step
Modulation standard: EN300744
Bandwidth: 6M, 7M, 8M
FFT mode: 2K, 8K
Constellation:QPSK, 16QAM, 64QAM
Guard Interval 1/4, 1/8, 1/16, 1/32
FEC 1/2, 2/3, 3/4, 5/6, 7/8
TS bit rate<31 Mbit/s
ATSC-T Modulation
Channel: 8VSB adjacent frequencies
Constellation: 8VSB
Frequency range: 50-960Mhz, 1Khz one step
Constellation: 8VSB
TS bit rate<19 Mbit/s
MER≥40 dB
DVB-C Modulation(16 or 32 DVB-C out option)
16* DVB-C output MODULATION
Channel: 16*DVB-C adjacent frequency RF out
Frequency range:50~960MHz,1Khz one step
Bandwidth range 192 Mhz between start frequency and end frequency,set 16 frequency within 192 Mhz bandwidth range
MER≥40 dB
symbol rate:5~7Mbaud
total output level adjustment -35~-5dBm by 0.1 dB step
DVB-C Standard J83.A (DVB-C, J83.B, J83.C)
Constellation (QAM):16,32,64,128, 256
|
Carrier |
Annex A |
Annex B |
Annex C |
|
|
Constellation (QAM) |
16,32,64,128, 256 |
64 |
256 |
64/256 |
|
Bandwidth (Mhz) |
8 |
6 |
6 |
6 |
|
Symbol Rate ( Mbaud) |
5-7 |
5.057 |
5.361 |
4.2-5.3 |
32* DVB-C output MODULATION
Channel:32*DVB-C non-adjacent frequency RF out
Frequency range:96~864MHz,1Khz one step
bandwidth range 768 Mhz,frequency points can be used flexible within bandwidth range
MER≥40 dB
symbol rate:5~7Mbaud
total output level adjustment -35~-5dBm by 0.1 dB step
DVB-C Standard J83.A (DVB-C, J83.B, J83.C)
|
Carrier |
Annex A |
Annex B |
Annex C |
|
|
Constellation (QAM) |
16,32,64,128, 256 |
64 |
256 |
64/256 |
|
Bandwidth (Mhz) |
8 |
6 |
6 |
6 |
|
Symbol Rate ( Mbaud) |
5-7 |
5.057 |
5.361 |
4.2-5.3 |
ISDB-T Modulation
Channel: ISDB-T frequency
Frequency range: 50-960Mhz, 1Khz one step
ISDB-T standard ARIB STD-B31
Constellation: DQPSK, QPSK, 16QAM, 64QAM
Guard Interval: 1/32, 1/16, 1/8, 1/4
Transmission mode: 2K, 4K, 8K
Code rate: 1/2, 3/4, 5/6, 7/8
Bandwidth: 6MHz
TS bit rate<21 Mbit/s
MER ≥ 40 dB
DTMB Standard GB20600-2006
Constellation: 4QAM, 16QAM, 32QAM, 64QAM
Code rate: 0.4, 0.6, 0.8
Guard Interval: 420, 595, 945 IONS
Multiplexing
Maximum PID remapping 180 input per channel
PID remapping by automatically or manually
PSI/SI: SDI/PMT/TOT/PAT/BAT/CAT/TDT/NIT Insert
Accurate PCR adjusting
Max numbers: 4 or 8 mux for RF and 1 Mux for 1*MPTS
ASI I/O
DVB-ASI: 2 * ASI input and 2*ASI output, one for backup, 75Ω, BNC, 188Bytes
MPEG-2: TS over DVB-ASI (EN 50083-9)
ASI Selectable out: mirror of one MPTS
IP I/O Stream Output
IP I/O
RJ45 port: 100/1000M GbE Port,1*DATA port used for input and output
IP output: 1*MPTS & 127*SPTS UDP/RTP IP Output (4*RF out)
8*MPTS&512*SPTS when 8*RF out
IP input: 128*MPTS/SPTS UDP/IP
TS over UDP, unicast, and multicast streaming TS over IP
System
Configuration Interface: web-based
Remote upgrade: via network
Connector: RJ45, 10/100M Ethernet interface
About US
DIGICAST-the Pioneer And Leader Of Video Transmission Technology System and Solution, focus on developing, manufacturing and sales for the products in digital TV/IPTV/OTT headend,video live application. With superior facilities, advanced technology and high quality, DIGICAST products widely used in more than 300 TV&Broad-casting operators around the world based on the stable high performance.
Product Advantages
DIGICAST promise that the equipment used 100% full new component, never use second-component, top-of-the-line quality that designed for professional broadcasting video operator system.



















