Overview


Features:
The device supports diverse input modes, which can be flexibly configured based on the actual signal sources:
A maximum of 24 FTA tuner inputs
A mixed input of two tuner standards plus HDMI, such as 8 DVB‑S/S2, 8 DVB‑T/T2 and 8 HDMI inputs
A single tuner standard combined with HDMI inputs, for example 12 DVB‑S/S2 and 8 HDMI inputs
It can be operated via both front LCD panel and web management. The built-in color LCD screen allows direct system configuration, channel status supervision, firmware inspection and IP address confirmation without connecting to a computer.
Designed for professional broadcast television scenarios, it supports PCR correction, PCR interval tuning, and LCN (Logical Channel Number) configuration.
It provides multi-carrier RF output, with selectable 4/8/16 carriers for DVB‑T, ISDB‑T, ATSC or DVB‑C, or 32 QAM DVB‑C outputs, depending on the number of program channels required.

Application
Advertising, monitoring, training and educating application
Enterprise, hotel, campus, hospital, restaurant, public place etc.



Hot Tags: rf dvb-c transmodulator, China rf dvb-c transmodulator manufacturers, suppliers, factory, modular modulator, fault isolation modulator, assembly line modulator, compatible modulator, test equipment modulator, qam modulator
Specifications
FTA Tuners Input
DVB-S/S2/S2X Tuner
Input frequency: 950-2150Mhz
Symbol rate: 1~54MSps (DVB-S QPSK)
1~60MSps (DVB-S2/S2X QPSK)
1~60MSps (DVB-S2/S2X 8PSK)
1~58MSps (DVB-S2/S2X 16APSK)
1~55MSps (DVB-S2/S2X 32APSK)
1~34MSps (DVB-S2/S2X 64APSK)
Signal strength: -65 ~ -25dBm
Half SyQuest Baseband filler (Roll off factor):
0.35 for DVB-S
0.15 to 0.35 for DVB-S2
0.05 to 0.35 for DVB-S2X
FEC demodulation: 1/2, 2/3, 3/4, 5/6, 7/8 (DVB-S QPSK)
1/4, 1/3, 2/5, 1/2, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 QPSK)
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 (DVB-S2 8PSK)
2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 16APSK)
3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 32APSK)
11/15, 7/9, 4/5, 5/6 (DVB-S2X 64APSK)
Demodulation mode: QPSK, 8PSK, 16APSK, 32APSK (Only DVB-S2)
LNB polarity selection: Vol 0, 13V, 18V Selectable
LNB band selection tone: 0/22Khz Selectable
Input Impedance: 75 Ω
FEC (Code Rate): 1/2, 2/3, 3/4, 5/6, 7/8
DiSEqC: DiSEqC 2.0 compliant
Modulation RF Output option
Modulation (4/8*RF DVB-T/ASTC/ISDB-T or 16/32 DVB-C for option)
Connector: 1 Port, F-Type, 75Ω
Output Return Loss: 14 dB
MER ≥ 40dB
RF output level: -20 ~ 0dbm, 0.1db step
Numbers of RF Channel: 4/8
Modulation Mode: DVB-C, DVB-T, ATSC, ISDB-T, DTMB option
DVB-T Modulation
Channel: DVB-T adjacent frequencies
Modulation standard: EN300744
Frequency range: 50-960Mhz,1Khz one step
Modulation standard: EN300744
Bandwidth: 6M, 7M, 8M
FFT mode: 2K, 8K
Constellation:QPSK, 16QAM, 64QAM
Guard Interval 1/4, 1/8, 1/16, 1/32
FEC 1/2, 2/3, 3/4, 5/6, 7/8
TS bit rate<31 Mbit/s
ATSC-T Modulation
Channel: 8VSB adjacent frequencies
Constellation: 8VSB
Frequency range: 50-960Mhz, 1Khz one step
Constellation: 8VSB
TS bit rate<19 Mbit/s
MER≥40 dB
DVB-C Modulation(16 or 32 DVB-C out option)
16* DVB-C output MODULATION
Channel: 16*DVB-C adjacent frequency RF out
Frequency range:50~960MHz,1Khz one step
Bandwidth range 192 Mhz between start frequency and end frequency,set 16 frequency within 192 Mhz bandwidth range
MER≥40 dB
symbol rate:5~7Mbaud
total output level adjustment -35~-5dBm by 0.1 dB step
DVB-C Standard J83.A (DVB-C, J83.B, J83.C)
Constellation (QAM):16,32,64,128, 256
|
Carrier |
Annex A |
Annex B |
Annex C |
|
|
Constellation (QAM) |
16,32,64,128, 256 |
64 |
256 |
64/256 |
|
Bandwidth (Mhz) |
8 |
6 |
6 |
6 |
|
Symbol Rate ( Mbaud) |
5-7 |
5.057 |
5.361 |
4.2-5.3 |
32* DVB-C output MODULATION
Channel:32*DVB-C non-adjacent frequency RF out
Frequency range:96~864MHz,1Khz one step
bandwidth range 768 Mhz,frequency points can be used flexible within bandwidth range
MER≥40 dB
symbol rate:5~7Mbaud
total output level adjustment -35~-5dBm by 0.1 dB step
DVB-C Standard J83.A (DVB-C, J83.B, J83.C)
|
Carrier |
Annex A |
Annex B |
Annex C |
|
|
Constellation (QAM) |
16,32,64,128, 256 |
64 |
256 |
64/256 |
|
Bandwidth (Mhz) |
8 |
6 |
6 |
6 |
|
Symbol Rate ( Mbaud) |
5-7 |
5.057 |
5.361 |
4.2-5.3 |
ISDB-T Modulation
Channel: ISDB-T frequency
Frequency range: 50-960Mhz, 1Khz one step
ISDB-T standard ARIB STD-B31
Constellation: DQPSK, QPSK, 16QAM, 64QAM
Guard Interval: 1/32, 1/16, 1/8, 1/4
Transmission mode: 2K, 4K, 8K
Code rate: 1/2, 3/4, 5/6, 7/8
Bandwidth: 6MHz
TS bit rate<21 Mbit/s
MER ≥ 40 dB
DTMB Standard GB20600-2006
Constellation: 4QAM, 16QAM, 32QAM, 64QAM
Code rate: 0.4, 0.6, 0.8
Guard Interval: 420, 595, 945 IONS
Multiplexing
Maximum PID remapping 180 input per channel
PID remapping by automatically or manually
PSI/SI: SDI/PMT/TOT/PAT/BAT/CAT/TDT/NIT Insert
Accurate PCR adjusting
Max numbers: 4 or 8 mux for RF and 1 Mux for 1*MPTS
ASI I/O
DVB-ASI: 2 * ASI input and 2*ASI output, one for backup, 75Ω, BNC, 188Bytes
MPEG-2: TS over DVB-ASI (EN 50083-9)
ASI Selectable out: mirror of one MPTS
IP I/O Stream Output
IP I/O
RJ45 port: 100/1000M GbE Port,1*DATA port used for input and output
IP output: 1*MPTS & 127*SPTS UDP/RTP IP Output (4*RF out)
8*MPTS&512*SPTS when 8*RF out
IP input: 128*MPTS/SPTS UDP/IP
TS over UDP, unicast, and multicast streaming TS over IP
System
Configuration Interface: web-based
Remote upgrade: via network
Connector: RJ45, 10/100M Ethernet interface



















