Overview
DMB-90E-CI Multichannel Professional Receiver features a modular rear panel supporting up to six plug‑in modules, each with 2× independent satellite/tuner inputs (DVB‑S/S2/S2X, DVB‑T, ATSC, or ISDB‑T) and 2× CI slots for decrypting encrypted channels using standard CAM cards. The unit accommodates a maximum of 12 tuner inputs, with selectable configurations of 4, 8, or 12 tuners. It also supports conversion of mixed signal sources-including tuner, HDMI, ASI, and IP inputs-and delivers IP output through 4× MPTS plus 512× SPTS streams. Additionally, the receiver provides 2× ASI inputs for external transport stream sources. Integrated tuner demodulation enables the device to process signals from 4, 8, or 12 input channels and output IP‑encapsulated streams via dedicated IP addresses and ports.
Features:
DMB-90E-CI Multi-Channel Professional Receiver
Modular Input Configuration
The DMB-90E-CI features a modular rear panel that supports up to six plug-in modules. Each module provides 2× independent tuner inputs (supporting DVB‑S/S2/S2X, DVB‑T, ATSC, or ISDB‑T standards) and 2× CI slots for decrypting encrypted channels via standard CAM cards. The system can be configured for 4, 8, or 12 tuner inputs and also supports mixed input types, including tuner, HDMI, ASI, and IP sources.
Output Capabilities
IP Output: Delivers 4× MPTS and 512× SPTS streams.
ASI Interface: Includes 2× ASI inputs for external transport streams.
Integrated Demodulation & IP Packaging
The device integrates tuner demodulation, processing signals from 4, 8, or 12 input channels, and encapsulates them into IP packets that are output through dedicated IP addresses and ports.
Typical Applications
Suitable for broadcast headends, IPTV/OTT systems, hotels, campuses, and other facilities requiring multi‑source reception, decryption, and IP‑based signal distribution.
Hot Tags: qam to ip gateway, China qam to ip gateway manufacturers, suppliers, factory, rf decoders ird s, H265 4K HD Professional IRD, Professional Integrated Receiver Decoder, Broadcast IRD Receivers, QAM DVB C To IP Converter
Specifications
FTA TUNERS INPUT
ISDB-T/Tb Tuner
Input frequency range: 110 ~ 862MHz
DVB-C (J83.A, J83.C, NO Annex B)
Carrier: Annex A,Annex C
Constellation (QAM): 16, 32, 64, 128, 256, 64/256
Bandwidth (Mhz): 8, 6
Symbol Rate (Mbaud): 5-7, 4.2-5.3
Tuner interface: Connecter F-female type
DVB-S/S2/S2X Tuner
(DVB-SS2X is option and extra cost when chose DVB-SS2 tuner input)
Input frequency: 950-2150Mhz
Symbol rate: 1~54MSps (DVB-S QPSK)
1~60MSps (DVB-S2/S2X QPSK)
1~60MSps (DVB-S2/S2X 8PSK)
1~58MSps (DVB-S2/S2X 16APSK)
1~55MSps (DVB-S2/S2X 32APSK)
1~34MSps (DVB-S2/S2X 64APSK)
Signal strength: -65 ~ -25dBm
Half SyQuest Baseband filler (Roll off factor):
0.35 for DVB-S
0.15 to 0.35 for DVB-S2
0.05 to 0.35 for DVB-S2X
FEC demodulation: 1/2, 2/3, 3/4, 5/6, 7/8 (DVB-S QPSK)
1/4, 1/3, 2/5, 1/2, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 QPSK)
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 (DVB-S2 8PSK)
2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 16APSK)
3/4, 4/5, 5/6, 8/9, 9/10 (DVB-S2 32APSK)
11/15, 7/9, 4/5, 5/6 (DVB-S2X 64APSK-option)
Demodulation mode: QPSK, 8PSK, 16APSK, 32APSK (Only DVB-S2)
LNB polarity selection: Vol 0, 13V, 18V Selectable
LNB band selection tone: 0/22Khz Selectable
Input Impedance: 75 Ω
FEC (Code Rate): 1/2, 2/3, 3/4, 5/6, 7/8
DiSEqC: DiSEqC 2.0 compliant
IP/ASI OUTPUT
ASI I/O
DVB-ASI: 2 ASI input and output, 75Ω, BNC, 188Bytes
MPEG-2 TS over DVB-ASI (EN 50083-9)
ASI out: selectable mirror of one MPTS
IP I/O
RJ45 Port: 100/1000M GbE Port, 1*DATA port used for input and output
IP output: 4*MPTS+512 SPTS from Data port
IP input: 128*MPTS/SPTS UDP/IP input from Data port
TS over UDP, unicast, and multicast streaming TS over RTP/RTSP
Configurable Packet size (2-7)x188 Bytes, filter null packet
SPTS limit selectable: 2.3M, 2.5M, 2.9, 3.3M, 3.8M, 4.6M, 5.7M, 7.6M, 11.5M, 23M
System
Local interface: LCD + control buttons
Configuration interface: Web-based
Remote upgrade: via network
Connector: RJ45, 100M/1000M Ethernet interface
Physical and Power
Voltage: 100 to 120/200 to 240V AC ±10%; 50/60Hz
Consumption: 60W
Operating temperature: 0~50°C
Storage temperature: -20 ~ 80℃
Dimensions: 483mm(W)*380mm(D)*44.5mm(H)
Weight: 9.3 kg/pc
