1080p Rf Modulator

1080p Rf Modulator
Details:
Highlight
Digital RF 24 channels HDMI to DVB-C coax Modulator
Model #: DMB-9581E
1: Multi-function encoder,modulator,multiplexer,ip asi gateway all in one
2: Various input option: HDMI+Tuners(DVB-SS2/TT2/C/ISDB-T/ATSC)mixed input,128*IP and ASI default input

3: Widely used for insert hdmi,ASI,IP signal,frequency source programs to existing coaxial RF System
4: RF out carriers quantity option according the quantity of programs.
Send Inquiry
Download
Description
Technical Parameters

Overview

 

The DMB-9581E Encoder/Modulator is a compact all-in-one unit that combines MPEG-4/AVC H.264 encoding, multiplexing, and modulation capabilities within a standard 1U chassis.

It is capable of converting 8/12/16/20/24 HDMI inputs, IP streams, and dual ASI inputs into RF outputs compliant with DVB-C, DVB-T, ISDB-T, and ATSC standards, supporting a frequency range from 50 to 960 MHz. Additionally, the device features two ASI interfaces and one IP interface for transport stream (TS) output

 

1

 

Features:

 

This integrated encoder, modulator and multiplexer supports not only HDMI inputs but also 128 MPTS/SPTS UDP/IP streams plus 2 ASI inputs. RF output can be generated from any source among HDMI, IP and ASI. It also delivers IP output at up to 127 SPTS over UDP/RTP, 1 or 8 MPTS, and 2 independent ASI outputs. For RF output, configurations include 4/8/16 channels of DVB-T/ATSC-T/ISDB-T/Tb/DTMB or 16/32 channels of DVB-C, all selectable based on actual needs. Please note that when using ISDB-T RF output, only 1 ASI input is available, and only 2K mode is supported, with no compatibility for 4K or 8K modes.

The device works with a wide range of signal sources and accepts mixed HDMI and tuner inputs covering DVB-S/S2/C/T/T2/ISDB-T/ATSC standards. A typical setup can include 16 HDMI inputs along with 8 tuner channels.

It offers flexible frequency configuration with a bandwidth of up to 768 MHz, allowing adjustable frequency assignment within the range when operating at 16 RF outputs.

A multi-carrier version is available, providing 4/8/16 outputs for DVB-T/C/ATSC/ISDB-T or 32 QAM DVB-C outputs, which can be chosen according to the number of program channels required.

 

2

 

Application

 

Various of DTV/CATV Broadcasting Systems

Distribute IP source,HDMI programs source to All TVs over existing TV coax

Upgrade all your analog Head-ends to digital TV Solution

Enterprise, hotel, campus, hospital, restaurant, public place etc

Works with Digital TV transmitter in wireless TV broadcasting

Low cost Digital TV distribution

 

3

FAQ

What is your MOQ?

Because our company produces a variety of products, the minimum order quantity varies accordingly. Different products are affected by raw material reserves, product value, production cycle, order progress, and inventory. The minimum order quantity of some products is 1 piece, while the minimum order quantity of some products may exceed 1,000 pieces. Please ask our salesman in detail to get the latest and most accurate information.

What is the name of your factory and where is it located?

Our factory name is Hangzhou Dtvane Tech Co., Ltd. located at Binkang Road, Binjiang District, Hangzhou, China

What is a headend?

A headend is used to receive TV channels from external sources and convert them to a unified format for distribution to the in-room TVs. A traditional headend consists of terrestrial and/or satellite antennas and an appliance that converts the TV signals.

Broadcast headend or IPTV headend?

A broadcast headend is used for distribution in a coaxial antenna network inside the building. An IPTV headend is used for streaming multicast IPTV channels over a local area network (LAN) instead of the coax network. So, if you already have a coax network and don't want to upgrade to IPTV and LAN you need a broadcast headend, otherwise an IPTV version. Some hotel TV systems use both to distribute different kinds of channels, but the cost-efficient version is to go with one or the other.

Where do the TV channels come from?

The headend typically receives TV channels from satellite dishes, terrestrial antennas and/or cable from cable TV operators. It's also possible to receive TV channels from the internet and other network equipment like IPTV cameras or computers.

 

Hot Tags: 1080p rf modulator, China 1080p rf modulator manufacturers, suppliers, factory, TV Modulator HDMI, hdmi to rf modulator, HDMI To RF Converter, Modulator HDMI, HDMI Modulator

Technical Specifications

 

Video Specifications

Video compression: MPEG-4 AVC/H.264

Video inputs: Version 1: 4/8/12/16/20/24*HDMI for option

Version 2: HDMI+Tuner Mixed input

The Input Resolution:

1920×1080@60P, 1920×1080@60i, 1920×1080@50P, 1920×1080@50i,

1280×720@60P, 1280×720@50P, 720×576@50i, 720×480@60i

The Output Resolution(Max 1080P@60 FPS):

1920×1080@60P,1920×1080@50P,1920×1080@30P,1920×1080@25P, 1280×720@30P,1280×720@25P, 720×576@25P, 720×480@30P

Bit-rate: 1 ~ 13Mbps, CBR/VBR

GOP Structure: IPPPP (P Frame for adjustment, without B Frame)

 

Audio Specifications

Encoding: MPEG-1 Layer 2

Sampling rate: 48KHz

Resolution: 24-bit

Bit-rate : 64kbps, 128Kbps, 192kbps, 224kbps, 256kbps, 320kbps, 384kbps

Audio Gain: 0-255

 

Inputs and Outputs

 

ASI Input/output

Channel: 2*ASI(Independent) input and 2*ASI output

Interface: BNC, 75 ohm

Signal level 200-800mVp-p

Packet length: 188 bytes

Maximum bit-rate: per port ≤100Mbps

Packet mode: Byte mode

 

IP Input and Output

RJ45 Port, 100/1000M GigE Port

Simultaneous output with 127*SPTS + 1*MPTS (4*RF Output)/ 8*MPTS (8*RF / 16*RF DVB-C Output)

TS over RTP, UDP unicast and multicast streaming

Configurable packet size(2-7)x188Bytes

Filter Null Packet

Total Bitrate: 1-200Mbps (Should be More than Encoding bitrate)

 

Modulation (4/8/16*RF DVB-T/ATSC/ISDB-T or 16/32 DVB-C out for option)

Connector: 1 Port, F-Type, 75Ω

Output Return Loss: 14 dB

MER ≥40dB

RF output level: -20 ~ 0dbm, 0.1db step

Numbers of RF Channel: 4/8/16

Modulation Mode: DVB-C, DVB-T, ATSC, ISDB-T, DTMB option

 

DVB-T Modulation

Channel: DVB-T adjacent frequencies

Modulation standard: EN300744

Frequency range:50-960Mhz,1Khz one step

Modulation standard: EN300744

Bandwidth: 6M, 7M, 8M

FFT mode: 2K, 8K

Constellation:QPSK,16QAM,64QAM

Guard Interval 1/4, 1/8, 1/16, 1/32

FEC 1/2, 2/3, 3/4, 5/6, 7/8

TS bit rate < 31 Mbit/s

 

ATSC-T Modulation

Channel: 8VSB adjacent frequencies

Constellation: 8VSB

Frequency range:50-960Mhz,1Khz one step

Constellation: 8VSB

TS bit rate <19 Mbit/s

MER≧40 dB

 

DVB-C Modulation(16 or 32 DVB-C out option)

16* DVB-C Output Modulation

Channel: 16*DVB-C adjacent frequency RF out

Frequency range:50~960MHz,1Khz one step

Bandwidth range 192 Mhz between start frequency and end frequency,set 16 frequency within 192 Mhz bandwidth range

 

230

MER≥40 dB

symbol rate:5~7Mbaud

total output level adjustment -35~-5dBm by 0.1 dB step

DVB-C Standard J83.A (DVB-C, J83.B, J83.C)

Constellation (QAM):16,32,64,128, 256

 

Carrier

Annex A

Annex B

Annex C

Constellation

(QAM)

16,32,64,128, 256

64

256

64/256

Bandwidth

(Mhz)

8

6

6

6

Symbol Rate

( Mbaud)

5-7

5.057

5.361

4.2-5.3

 

32* DVB-C Output Modulation

Channel:32*DVB-C non-adjacent frequency RF out

Frequency range:96~864MHz,1Khz one step

bandwidth range 768 Mhz,frequency points can be used flexible within bandwidth range

MER≥40 dB

symbol rate:5~7Mbaud

total output level adjustment -35~-5dBm by 0.1 dB step

DVB-C Standard J83.A (DVB-C, J83.B, J83.C)

 

Carrier

Annex A

Annex B

Annex C

Constellation

(QAM)

16,32,64,128, 256

64

256

64/256

Bandwidth

(Mhz)

8

6

6

6

Symbol Rate

( Mbaud)

5-7

5.057

5.361

4.2-5.3

 

ISDB-T Modulation

Channel: ISDB-T frequency

when ISDB-T RF output only 1*ASI input,

Frequency range: 50-960Mhz,1Khz one step

ISDB-T Standard ARIB STD-B31

Constellation: DQPSK, QPSK, 16QAM, 64QAM

Guard Interval:1/32, 1/16, 1/8, 1/4

Transmission Mode:2K,4K,8K(when 4*ISDB-T out, Mode only support 2*K, when 8/16*ISDB-T out,support 2K,4K,8K option)

Code rate:1/2, 3/4, 5/6, 7/8

Bandwidth:6MHz

TS bit rate<21 Mbit/s

MER≥40 dB

 

DTMB Standard GB20600-2006

Constellation: 4QAM, 16QAM, 32QAM, 64QAM

Code rate: 0.4, 0.6, 0.8

Guard Interval: 420, 595, 945 IONS

 

System Management

Connector: 1*RJ-45, 10/100 Base-T interface.

Front panel and web browser via Ethernet interface

 

Physical and Power

Voltage: 100 to 120/200 to 240V AC ±10%; 50/60Hz

Consumption: 60W

Operating temperature: 0 ~ 45℃

Storage temperature: -20 ~ 80℃

Relative humidity: 10%~90%(non-condensing)

Dimensions: 482mm(W) × 380(D)mm × 45mm(H)(19inch, 1RU)

Weight: 9.6 KGS

product-1066-1341

 

Send Inquiry