Overview
DMB-5100E Series Multi-Protocol IP To RF modulator is a simple all-in-one utility device gathering IP Transport Streams by 3 GigE Data ports,
3xGigabit Ethernet DATA Ports for IP input and output ,Data 1 with RTMP/HTTP/RTSP/HLS/SRT input,Data 2 with 8*MPTS UDP/RTP out,
Data 3 with 128*MPTS/SPTS input (DATA2,UDP/RTP),also support 6*ASI input, then modulate IP and ASI into 16*DVB-T or 24 DVB-T or 8 DVB-T Non-adjacent RF Carriers output for South Amercia Colombia,Chile,Venezuela, Guatemala and Africa, European market.



Features:
Powerful modulation performance---Data 1 with RTMP/HTTP/RTSP/HLS/SRT input,Data 2 with 8*MPTS UDP/RTP out,Data 3 with 128*MPTS/SPTS input (DATA2,UDP/RTP) & Unicast / Multicast
SRT Streaming Input to RF out--- Modulation the HTTP/SRT/HLS/RTMP/RTSP internet streaming to local RF signal to coaxial system
Multi-RF Carriers out for hundreds of programs---Receive up to hundreds of ip streams,output up 16/8/24
DVB-T carriers multi-channel RF Frequencies with the ability to distribute hundreds of SD HD programs over Coax/terrestrial transmission
High efficient for usage the frequency point-16/24/8 Non-Adjacent frequency out for fully use the frequency point sources,non-adjacent frequency RF out, Frequency range:96~864MHz,
bandwidth range 768 Mhz, frequency points can be used flexible within bandwidth range

About US
DIGICAST-the Pioneer And Leader Of Video Transmission Technology System and Solution, focus on developing, manufacturing and sales for the products in digital TV/IPTV/OTT headend,video live application. With superior facilities, advanced technology and high quality, DIGICAST products widely used in more than 300 TV&Broad-casting operators around the world based on the stable high performance.
DMB-5100E Series Multi-Protocol IP To RF modulator is a simple all-in-one utility device gathering IP Transport Streams by 3 GigE Data ports,
3xGigabit Ethernet DATA Ports for IP input and output ,Data 1 with RTMP/HTTP/RTSP/HLS/SRT input,Data 2 with 8*MPTS UDP/RTP out,
Data 3 with 128*MPTS/SPTS input (DATA2,UDP/RTP),also support 6*ASI input, then modulate IP and ASI into 16*DVB-T or 24 DVB-T or 8 DVB-T Non-adjacent RF Carriers output for South Amercia Colombia,Chile,Venezuela, Guatemala and Africa, European market.
Hot Tags: digital tv modulator, China digital tv modulator manufacturers, suppliers, factory, rf modulator, Digital Modulator, TV Modulator, Digital RF Moduator
Specifications
IP Stream Input
3 GigE ports , Data 1 with RTMP/HTTP/RTSP/HLS/SRT input,Data 2 with 8*MPTS UDP/RTP out,Data 3 with 128*MPTS/SPTS input (DATA2,UDP/RTP) & Unicast / Multicast
ASI Stream Input
Support: 6*ASI input
Connector: BNC female, 75Ω
Signal Level: 200-800mVp-p
Packet Length: 188 bytes
Maximum bit-rate: per port≤100Mbps
RF Output Modulation
DVB-T Modulation
DVB-T RF out: 8/16/12/24*ISDB-T non-adjacent frequency RF out,
Frequency range: 96~864MHz,1Khz one step
ISDB-T Standard ARIB STD-B31
Constellation: DQPSK, QPSK, 16QAM, 64QAM
Guard Interval:1/32, 1/16, 1/8, 1/4
Transmission Mode:2K,4K,8K
Code rate:1/2, 3/4, 5/6, 7/8
Bandwidth:6MHz
TS bit rate<21 Mbit/s
MER≥40 dB
total output level adjustment -35~-5dBm by 0.1 dB step
Multiplexing
Supports Up to 180 PIDs per channel with PID remapping (manual or auto)
Accurate PCR adjusting
Capable of PSI/SI SDI/PMT/TOT/PAT/BAT/CAT/TDT/NIT Insert
Control and Monitoring
Configuration Interface: Web-based
Remote: Upgrade via network
Connector: RJ45,100M/1000M Ethernet interface
Physical and Power
Voltage 110~220V
Consumption: 18~20W
Operating temperature: 0~50°C
Dimensions: 483mm(W)*360mm(D)*44.5mm(H)
Weight: 7KG/pc


















