Introduction
The HDMI Extender over single fiber is a tool for extending your HDMI signal over long distances to a compatible display. Instead of using expensive HDMI cables, your existing fiber cables/sockets can be utilized to perform advanced functions like transferring Deep Color (12 bits/color) video and digital audio, with a bandwidth up to 225MHz. The HDMI Transmitter and Receiver, over one fiber extender is your substantial HDMI extender tool. The HDMI Extender also support IR re-transmitting, so you can control the Source which is 20km outside using the HDMI extender.
Features:
- Signal transmission:SC fiber(recommended) cables up to 20km instead of HDMI cables are connected between TX and RX Extender.
- Support HDMI1.3, HDCP 1.2 protocol compliant.
- Support input/output resolution:480p,576p,720p,1080p.
- Support point-to-point mode, one point-to-many mode.
- Protocol compliant TCP/IP one transmitter and multiple receivers,with a maximum of 253 receivers.
- Support IR control, you can control STB or Blue-Ray DVD at receiving site by remote control.
- Support IR remote control 20~60KHz,NEC.
- Installs in minutes,No loss of quality
SPECIFICATION
HDMI Version-----------------------------------------------------------------HDMI1.3a
Transmitter Input Port --------------------------------------------------HDMIx1 (AF)
Transmitter Output Ports -------------------HDMIx1(AF),SC Fiberx1,IR TXx1
Receiver Input Ports------------------------------------------SC Fiberx1,IR RXx1
Receiver Output Port----------------------------------------------------HDMIx1(AF)
Frequency Bandwidth--------------------------------------2.25Gbps (single link)
Input/Output Resolutions---------------------------------480p,576p,720p,1080p
Audio-------------------------------------------Sample rate:32kHz,44.1kHz,48kHz
IR remote control-----------------------------------------------------20~60KHz;NEC
ESD Protection Human Body Model ---------------± 8kV (air-gap discharge)
± 4kV (contact discharge)
Operating Temperature--------------------------------0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature ---------------------------------20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity---------------------------------20~90% RH (non-condensing)
Dimensions (mm)-----------------------------------------------------------120x73x22
Hot Tags: hdmi fiber transmitter and receiver, China hdmi fiber transmitter and receiver manufacturers, suppliers, factory, SDI Fiber Transmitter And Receiver, Satellite Modulator, rf transmitter, Church Streaming Encoder, rf modulator, isdb modulator
CONNECT AND OPERATE
Before installation, please make sure all devices you wish to connect have been turned off.
- Connect HDMI signal source to the transmitter of HDMI extender.
- Use fiber cable(Recommend:SC) to connect transmitter and receiver of HDMI Extender.
- Connect the display equipment with HDMI connector to the receiver of HDMI extender.
- Power on all connected devices, Choose the input of the display device to its HDMI channel.
Transmitter and Receiver one by N application, N can up to 253.
