Overview
What is EDFA? When optical transmitting over long distance, the optical signal has to be amplified many times because of the signal loss from fiber attenuation, connectivity losses, fiber splicing losses, etc. Before optical amplifier is invented, the optical signal has to be first converted into electrical signal, amplified, and then converted back to optical signal again. The process is very complicated and expensive. EDFA Optical amplifier can amplify signals directly, this process is significantly cheaper and started a fiber optic revolution. EDFA, or Erbium-doped Fiber Amplifier, uses the Erbium-doped fiber as optical amplification medium to directly enhance the signals. The amplifying medium is a glass optical fiber doped with erbium ions. The erbium-doped fiber gain medium amplifies light at wavelengths that are in the neighborhood of 1550 nm-the optical wavelengths that suffer minimum attenuation in optical fibers. EDFA works best in the range 1530 to 1565 nm, and it possesses low noise and can amplify many wavelengths simultaneously, making it the fiber amplifier of choice for most applications in optical communications.
The EDFA high-power optical amplifier is a high-power multi-port output fiber amplifier with a gain spectrum bandwidth of 1535~1565nm. It is mainly designed for applications of CATV or 1~8 continuous strip channels (ITU wavelengths). It provides a flexible, low-cost solution for large- scale FTTH coverage of CATV systems in large and medium-sized cities.


Features:
|
Limit Parameter
|
|
|
Maximum received range
|
1535-1565 nm
|
|
Lowest input optical power
|
-10dBm
|
|
The highest input optical power
|
+10dBm
|
|
Extreme operating temperature
|
-5℃ ~+50℃
|
|
Limit supply voltage
|
AC(90V ~ 264V)
|
|
Technical Parameters
|
|
|
Wavelength
|
1535-1565nm
|
|
Input power range
|
-5dBm~+10dBm(normal input -2dBm~+5dBm)
|
|
Output optical power
|
26dBm~37dBm
|
|
Optical power stability
|
±0.1dBm
|
|
Noise figure
|
≤ 6.0dB(Pin=0dB)
|
|
Input return loss
|
≥ 45dB
|
|
Output return loss
|
≥ 45dB
|
|
C/N
|
≥ 50dB
|
|
C/CTB
|
≥ 65dB
|
|
C/CSO
|
≥ 65dB
|
|
Optical connector
|
SC/APC;SC/PC;LC/APC;LC/PC
|
|
Consumption
|
≤ 150w
|
|
Size
|
428(W)*482(L)*89(H)mm
|

Hot Tags: 32 port edfa 1550nm wdm optical fiber amplifier edfa, China 32 port edfa 1550nm wdm optical fiber amplifier edfa manufacturers, suppliers, factory, edfa amplifier, edfa optical amplifier edfa , 16 Port Erbium Doped Fiber Amplifier, Edfa Fiber Amplifier
Technical Parameter
|
Item |
Unit |
Technical parameter |
Remark |
|
|
CATV wavelength |
nm |
1535~1565 |
Center wavelength 1550nm |
|
|
PON OLT wavelength |
nm |
1310/1490 or 1270/1577 |
Customizable |
|
|
CATV Input optical power |
dBm |
-10dBm ~ +10dBm |
suggested value -5dBm~+10dBm |
|
|
Max output power |
dBm |
38 |
2U rack |
|
|
Optical power stability |
dB |
±0.1 |
||
|
Niose figure |
dB |
≤ 6 |
@+0dBm Input,λ=1550nm |
|
|
Reflection loss |
Input |
dB |
≥ 45 |
|
|
Output |
dB |
≥ 45 |
||
|
OSW |
Input ports |
2 |
||
|
Insertion loss |
dB |
≤1.0 |
||
|
Switching time |
s |
<0.5 |
||
|
Optical connector type |
SC/APC;SC/PC;LC/APC;LC/PC |
Customizable |
||
|
C/N |
dB |
≥ 50 |
The test conditions are performed by GT/T 184-2002. |
|
|
C/CTB |
dB |
≥ 63 |
||
|
C/CSO |
dB |
≥ 63 |
||
|
Supply voltage |
V |
AC110V/220V(90V ~ 265V) or DC48V(38- 58V) |
||
|
Equipment power consumption |
W |
< 70 |
||
|
Working temperature |
℃ |
-5 - +42 |
||
|
Max relative humidity |
% |
Maximum 95% without condensing |
||
|
Storage temperature |
℃ |
-40 ~ +80 |
||
|
Max storage relative humidity |
% |
Maximum 95% without condensing |
||
|
Dimensions |
mm |
337(W)*482(L)*44(H) |
||
|
Packing size (1 set) |
mm |
487(W)*582(L)*110(H) |
||


















