Overview
What is EDFA? When optical transmitting over long distance, the optical signal has to be amplified many times because of the signal loss from fiber attenuation, connectivity losses, fiber splicing losses, etc. Before optical amplifier is invented, the optical signal has to be first converted into electrical signal, amplified, and then converted back to optical signal again. The process is very complicated and expensive. EDFA Optical amplifier can amplify signals directly, this process is significantly cheaper and started a fiber optic revolution. EDFA, or Erbium-doped Fiber Amplifier, uses the Erbium-doped fiber as optical amplification medium to directly enhance the signals. The amplifying medium is a glass optical fiber doped with erbium ions. The erbium-doped fiber gain medium amplifies light at wavelengths that are in the neighborhood of 1550 nm-the optical wavelengths that suffer minimum attenuation in optical fibers. EDFA works best in the range 1530 to 1565 nm, and it possesses low noise and can amplify many wavelengths simultaneously, making it the fiber amplifier of choice for most applications in optical communications
Features:
◆High Power: Up to 2W total, 1 Unit for 2000～4000 optical node
◆Low Noise Figure: Below 5.5dB ( +5dBm input)
◆Er Yb co-doped DCF Amplify Technology：Patent Pump Dump Technology
◆Low CSO: ＜-70dBc
◆23dBm×N, 20dBm×N or 17dBm×N output is optional
◆Controllability and maneuverability: Dual CPU to deal Control loop and Communication separately
◆High Stability And Reliability: MTTF＞150000 Hours
◆Redundancy Hot Swap power module: 110/220VAC and 48VDC can plug Mix
◆Perfect Network Interface: Ethernet
◆Support SNMP network management
◆Intelligent Temperature Control System: using a dedicated Temperature control chip which make cooling and power loss reduce 30% than competitors
◆Output Power can be Adjustable by network and manual
◆Integrated 1310nm, 1490nm, 1550nm WDM (Optional)
◆OEM, Module is available
Hot Tags: 8 ports 1550nm optical fiber amplifier wdm edfa, China 8 ports 1550nm optical fiber amplifier wdm edfa manufacturers, suppliers, factory, Edfa Fiber Amplifier, 16 Port Erbium Doped Fiber Amplifier, edfa optical amplifier edfa , edfa amplifier
Technical Parameter
|
Item |
Unit |
Technical parameter |
Remark |
|
|
CATV wavelength |
nm |
1535~1565 |
Center wavelength 1550nm |
|
|
PON OLT wavelength |
nm |
1310/1490 or 1270/1577 |
Customizable |
|
|
CATV Input optical power |
dBm |
-10dBm ~ +10dBm |
suggested value -5dBm~+10dBm |
|
|
Max output power |
dBm |
38 |
2U rack |
|
|
Optical power stability |
dB |
±0.1 |
||
|
Niose figure |
dB |
≤ 6 |
@+0dBm Input,λ=1550nm |
|
|
Reflection loss |
Input |
dB |
≥ 45 |
|
|
Output |
dB |
≥ 45 |
||
|
OSW |
Input ports |
2 |
||
|
Insertion loss |
dB |
≤1.0 |
||
|
Switching time |
s |
＜0.5 |
||
|
Optical connector type |
SC/APC;SC/PC;LC/APC;LC/PC |
Customizable |
||
|
C/N |
dB |
≥ 50 |
The test conditions are performed by GT/T 184-2002. |
|
|
C/CTB |
dB |
≥ 63 |
||
|
C/CSO |
dB |
≥ 63 |
||
|
Supply voltage |
V |
AC110V/220V(90V ~ 265V) or DC48V(38- 58V) |
||
|
Equipment power consumption |
W |
＜ 70 |
||
|
Working temperature |
℃ |
-5 - +42 |
||
|
Max relative humidity |
% |
Maximum 95% without condensing |
||
|
Storage temperature |
℃ |
-40 ~ +80 |
||
|
Max storage relative humidity |
% |
Maximum 95% without condensing |
||
|
Dimensions |
mm |
337(W)*482(L)*44(H) |
||
|
Packing size (1 set) |
mm |
487(W)*582(L)*110(H) |
||
